No products
Ducati
Viewed products
-
Reversible single-arm...
The REV-D01 New Revers rear-arm stand...
Reversible single-arm stand for Ducati 848 S2R S4R 748 Hypermotard
New product
The REV-D01 New Revers rear-arm stand is suitable for Ducati Monster S2R, S4R, 696, 748, 769, 848, 916, 996 and other Ducati models. Allows maintenance work including the removal of the wheel and prevents the ovalization of the tire during long winter breaks. The pin with two diameters Ø 25,5/21,5 mm. rotates on two..
In stock
- Send to a friend
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
Data sheet
| Material | Steel |
| Wheels diameter | Ø 90 mm. |
| Color | Grey |
| Weight | 5,9 Kg. |
| Finish | Varnishing |
| Wheels rotation | Linear |
| Tube diameter | Oval tubular |
| Mono pin diameter | Ø 26,5 / 21,5 mm. |
More info
The REV-D01 New Revers rear-arm stand is suitable for Ducati Monster S2R, S4R, 696, 748, 769, 848, 916, 996 and other Ducati models. Allows maintenance work including the removal of the wheel and prevents the ovalization of the tire during long winter breaks. The pin with two diameters Ø 25,5/21,5 mm. rotates on two double-sealed bearings with a 25 mm hole. With the motorbike turned on the stand it is possible to turn the wheel even with the gear engaged.
With the simple inversion of the lifting lever and the specific pin, the same stand becomes reversible!
(ie.. you can use it on the opposite side of the motorbike)
Check the pin size in the Single arm pin application table
Spare pins in STANDS ACCESSORIES / Single-Arm Pins
The photos of the previous stand are only demonstrative
